Container One has partnered with Sherwin-Williams to provide our customers with the best shipping container paints on the market.
This industrial grade direct to metal acrylic (DTM) paint is an interior-exterior, water based, corrosion resistant acrylic coating for light to moderate industrial use. It is:
- Chemical Resistant
- Corrosion resistant
- Fast dry
- Flash rust-early rust resistance
- Suitable for use in USDA inspected facilities
Here is how much to order for each container sizes:
20 ft Containers - 3 Gallons
40 ft Containers - 5 Gallons
For anything extra - 1 Gallon
Since this is prepared after you order, once you purchase you will get a notification from us on where to go and pick up your paint at a local Sherwin-Williams store. You will get a chance to choose the exact color you want at this point in time too.
Note - this is made to order and will require you picking it up at a local Sherwin-Williams store
Once you go to pick up your paint, you can specify the exact color you want. Color matching is also available.
Wash surface before applying paint
Wash surface and sand rusty spots before painting
Wash, sand rusty spots, fix dents and prim the surface before painting
Airless Spray Specifications
Pressure: 1500 p.s.i.
Hose: 1/4 inch I.D.
Tip: 0.017 - 0.021 inch
Filter: 60 mesh
When using spray application, use a 50% overlap with each pass of the gun to avoid holidays, bare areas, and pinholes. If necessary, cross spray at a right angle.
Gun: Binks 95
Fluid Nozzle: 66
Air Nozzle: 63 PB
Atomization Pressure: 50 p.s.i.
Fluid Pressure: 10-20 p.s.i.
Reduction: Not recommended
1/4-3/8 inch woven